齐全的
大型切肉机能够快速的将肉类加工成为各种不同的形状，既节省了人力同时也降低了整体的生产成本。不过由于切肉机是一种非常复杂的机械设备且对于操作人员有相应要求，如果使用中操作不当很容易引发一些问题出现。那么切肉机操作时常出现的三个问题点具体是怎么样的呢？
The complete large-scale meat cutting machine can quickly process meat into various shapes, which not only saves manpower but also reduces the overall production cost. However, as the meat chopper is a very complex mechanical equipment and has corresponding requirements for operators, it is easy to cause some problems if it is not operated properly in use. What are the three problems that often occur in the operation of the meat cutting machine?
问题一：肉片粘连
Problem 1: adhesion of meat slices
如果在操作切肉机时出现肉片粘连的情况，此时可以先将切肉机的电源全部关闭，然后查看切肉机两个刀片之间的距离，了解排刀之间是否存在紧贴的情况，适当将两个刀片的位置进行简单调整就能够改善。
If the meat pieces are stuck during the operation of the meat cutting machine, the power supply of the meat cutting machine can be turned off first, and then the distance between the two blades of the meat cutting machine can be checked to find out whether there is a close contact between the rows of knives, and the position of the two blades can be improved by simple adjustment.
问题二：肉丝卷在刀轴上
Question 2: the shredded meat is rolled on the knife shaft
如果在切肉机使用的过程中出现了肉丝卷在刀轴上的情形，此时就要注意看下刀梳还有刀排之间的隔垫是否存在着缝隙，要是真有缝隙的话要注意及时的来做下调整，并将其放到贴合的位置上就能解决这个问题。
If the shredded meat is rolled on the knife shaft during the use of the meat cutting machine, at this time, it is necessary to pay attention to whether there is a gap between the lower knife comb and the spacer between the knife rows. If there is a gap, it is necessary to make timely adjustment and put it on the fitting position to solve this problem.
问题三：肉出现糊状
Problem 3: the meat is mushy
往往在切肉机运转的过程中如果出现糊状的话则可能是螺母太松了，这种问题的出现主要是切肉板以及切肉刀片之间的螺母没有拧紧，此时可以使用相关的工具对两者之间进行调整，保证其处于更佳的运转状态即可。
Often, if there is paste during the operation of the meat cutting machine, the nut may be too loose. This problem mainly occurs because the nut between the meat cutting plate and the meat cutting blade is not tightened. At this time, relevant tools can be used to adjust the two to ensure better operation.
品种繁多的切肉机其零部件是非常多的，因此在操作过程中务必要注意使用的方法且时刻关注零部件之间的运转是否存在着异常，只有零部件全部处于正常的位置上设备才能够正常的进行运转，而且在使用切肉机时还要注意定期的进行维护与保养才能使其寿命得到提升。
There are many parts and components of various meat cutting machines. Therefore, it is necessary to pay attention to the use methods during the operation and always pay attention to whether there is any abnormality in the operation of the parts and components. Only when all the parts and components are in the normal position can the equipment operate normally. In addition, when using the meat cutting machine, it is necessary to pay attention to regular maintenance to improve its service life.
The three problems that often occur in the operation of the meat cutting machine are specific. If you have any questions about it or want to purchase the machine, you might as well pay attention to our website first https://www.sfxjxbj.com Yes, consult for more information.
