切肉机适合于规划大的餐饮或肉类加工工厂，底座有轮，灵敏移动，刀具采纳外置悬挂式规划，洗拆便利，清洁更有保证。下面来讲讲切肉机操作流程以及操作注意事项吧。

The meat cutter is suitable for planning large catering or meat processing plants. The base has wheels and is sensitive to movement. The cutter adopts the external hanging patent planning, which makes it convenient to wash and disassemble, and the cleaning is more guaranteed. Let's talk about the operation process and precautions of the meat cutter.

大型切肉机操作流程大肉去骨头，并且改刀成进品条状或块状，插好电源，装好刀片，启动机器，注切刀片应向内旋转，把肉块放进去后耐心等待，把切好的肉片拿走或装盘。后关闭切肉机并进行清洗，处理。

The operation process of the large meat cutter is to remove the bones from the meat, and change the knife to the incoming strip or block. Plug in the power supply, install the blade, start the machine, note that the cutting blade should rotate inward, put the meat into it, wait patiently, and take away the cut meat or put it on the plate. Then shut down the meat cutter and clean it, sterilize it.

切肉机的清洗要看您切肉机的材质，如果您的是不锈钢材质的切肉机，您可以用水进行洗涤就可以了，清洗前拆开切肉的刀片一面早上刮伤。清洗完之后吹干在进行使用这样才能更好的保证清理到位。

The cleaning of the meat cutting machine depends on the material of your meat cutting machine. If your meat cutting machine is made of stainless steel, you can wash it with water. Before cleaning, remove the blade of the meat cutting machine and scratch it in the morning. After cleaning, blow dry and use it, so as to better ensure the cleaning in place.

大型切肉机操作注意事项1.机器应放置在平稳的地方，带轮的机器需把脚轮锁死。

Precautions for the operation of large meat cutting machine 1. the machine should be placed in a stable place, and the casters of the machine with wheels should be locked.

2.确认好机器的入料口无异物卡住，请按照标牌上的电源指示来接好电源和地线。

2. Confirm that there is no foreign matter stuck at the feeding port of the machine. Please connect the power supply and ground wire according to the power supply instructions on the label.

3.机器运作时，请勿把手申请机器内。

3. When the machine is in operation, do not apply your hand into the machine.

4.机器使用完毕后，请务必把电源切断，才能对机器进行拆洗。

4. After using the machine, be sure to cut off the power supply before disassembling and washing the machine.

5.电路部分不能清洗，拆洗时候请注意刀具等锋利部件。

5. The circuit part cannot be cleaned. Please pay attention to sharp parts such as knives when disassembling and washing.

此外使用切肉片机前，切肉片肉丝机请先用温水清洗干净，不要弄湿电机。使用切片机时，先开动电机，看刀片转向是否正确。切肉机如果逆转应马上纠正。用完后，先关掉切肉机电源，将可拆除部分拆下，用热水洗干净，然后装上。更多相关注意事项就来我们网站https://www.sfxjxbj.com了解吧！

In addition, before using the meat slicer, please clean the meat slicer with warm water first, and do not wet the motor. When using the slicer, first start the motor to see whether the blade rotation is correct. If the meat cutter reverses, it should be corrected immediately. After use, first turn off the power supply of the meat cutter, remove the removable part, wash it with hot water, and then install it. Come to our website for more relevant precautions https://www.sfxjxbj.com Understand!